Coil Lifespan

| August 29, 2016

Hi there vapers ~ I just want to ask how long will the coil be replaced considering you have done it correclty upon building the coil. Btw, newbie here & I'm not sure if there is similar thread already – tyia ~

Help W/ fused clapton ohms.

| August 28, 2016

hey guys currently going for my first fused clapton and im having trouble figuring out why my ohms are so low, trying to build for my noisy cricket, wire im using is 26 n80 core and a 32 kanthal wrap, currently have a 8 wrap at 3mm diameter that is sitting at .25 ohms a […]

Coil issue! Annoying

| August 28, 2016

So I went by a suggestion from the seller to make sure I can run dual coils with the rda and box that I have which is the KBox mini 75w and Doge v2. coils are huge! Compared to the same ohm coil I built these are like 6 times bigger! Running in just single […]

Kanger SSOCC take coil apart/rebuild from a Subvod Toptank

| August 23, 2016

Its easy and you don't destroy the coil wire. I don't show a rebuild but most know how to make a coil. I haven't got around to buy some 28g wire and flat cotton so I cleaned the coil wire and cotton and reused. First get something to run thru the air vents, I used […]

26awg SS sub ohm coil turns?

| August 23, 2016

How many turns do I need to do using 26g SS single coil to get to point five ohm? Is a standard screw driver to wide? I have mini screw drivers, etc no coil tools so can't really measure in mm :/ Sent from my SM-G900V using Tapatalk

Stainless mesh-only coils (no wire!?)

| August 23, 2016

I just tried using stainless mesh wound straight onto cotton and found it works pretty well: <img src="http://ecigorlando.com/wp-content/plugins/wp-o-matic/cache/8be2b2518f_ac7d9c5e82.jpg” class=”bbCodeImage LbImage” alt=”[​IMG]” data-url=”http://ecigorlando.com/wp-content/plugins/wp-o-matic/cache/8be2b2518f_ac7d9c5e82.jpg” /> (soz for phone camera and shit-tier build) There are three main things that I think this is good for: Since it is so thin and spread out it has very little thermal […]

Changed the wires for the first time ! Yey !

| August 23, 2016

i was using the pre build wires that came with my limitless plus for like 2 weeks .. And i noticed throat icky feeling for the first few hits.. The wires were already black.. My friend told me that they needed to be replaced already.. I used pre built clapton wires for now.. And the […]

Building for parallel mech mod ?

| August 23, 2016

What is your favorite built for parallel mech mod with Ka1 or N80 in 22mm or 24 mm attys? It seems that I like "warmer" vape since I am constantly finding satisfaction in 130-170Watt range when I build for series. coils that are "snappy" and have a quick ramp up and down are even more […]

26 gauge ss 316L 9 Wrap dual coil

| August 19, 2016

What wattage range should be ok for 26 gauge ss 316L 9 Wrap 3.5mm dual coils. I am trying to use it in the limitless plus but keep on getting dry hits

Burning through coils

| August 18, 2016

I got the eleaf istick 50w. Had the atlantis v1 with new .5 on it yesterday and day before running 35w-40w. coil burnt in 2 days. Switched to my arctic tank with new .2 coil at 6pm today. Running 40-45w..4 hours later. coils are burnt. What the hecks going on? I don't let it run […]